DO IT YOURSELF GUIDE

If you would like to purchase our own synthetic grass and install it yourself, there are a few important tips to follow in the process outlined below. In addition, if you have any queries along the way, feel free to contact us for advice.

STEP 1

Remove all existing lawn and all roots as best as possible.

STEP 2

Level area, wet and compact it.
Cover area with weed killer to stop any grass regrowth.

STEP 3

Cover area with crusher dust at least 40 to 60mm

STEP 4

Level wet and compact again, check area and fill any uneven areas.

STEP 5

Level wet and compact again, check area and fill any uneven areas.

Lay your lawn, ensure all strands are running in same direction before joining.

STEP 6

Peg lawn in position, lay joint tape between lawn sections folded back. Apply glue to tape and lay 1 side down at a time ensuring strands do not get glue on them.

STEP 7

Now flush peg joint down about 10cm to 15cm apart.

STEP 8

Cut in any edges, cover total lawn with dry white sand to hold it down, brush sand in and you are done – no more work.

DIY TIME LAPSE

Grassworks shows you a 30 sec movie of how to do.